 |
Multi Power/Video Coaxial Transmission System |
 |
 |
 |
|
We develop and create complete CCTV transmission solutions for Power/Video/Audio transceivers systems over ordinary Coaxial cable. i.e. The Power/Video/Audio signals can be transmitted via a single coaxial cable and the transmission distance can be over 1 Km. This transmission system will make the camera installation simple, easy and saving-cost.
The Model CTX-101VAP Power/Video/Audio Transmitter +12VDC/1A or 12VAC/2A Converter is a transmitter combined with an AC40-90V to 12VDC converter. Designed to fit on the back of a fixed 12 VDC camera and IR LED, this unit is architect to convert AC40-90V power from the control room (DVR Site), while use with CRX-100VAP delivering real-time video, audio and power signals at extended distances, all over single coaxial cable.
The Receiver CRX-100VAP in the control room (DVR Site), which allow AC110 or 220V inputs that can support at distance camera loads up to DC12V/1A for RG 11cable runs under 4800ft (1600m) or RG 6 cable runs under 3000ft (1000m). The Power/Video/Audio transmission system has built-in diagnostic LED to display load/no-load at a glance and surge protection, damaging voltage spike problems are eliminated.
|
Key Features |
|
| 。 |
Multi Signals: Video/Power/Audio signals transmit over a coaxial cable. |
| 。 |
High Current: Power on line supports DC12V/1A or DC12/2A for the camera usage at long distance transmission. |
| 。 |
Long Distance: Up to 2000 Meters transmission distance via coaxial cable. |
| 。 |
Save the cabling and maintenance costs: All-in-one (Video/Audio/ Power) solution, no need to set up power cabling for the camera. |
| 。 |
Surge Protection: Built in power/video/audio surge protector for best outdoor usage. |
| 。 |
Indicator: LED indicator to show the status of Power, Video, and Audio transmission. |
| 。 |
Interference: Superior interference immunity. |
| 。 |
Safety: Safer power construction via AC80V/1A. |
| 。 |
Secure: Secure the video signal by RF Modulation transmission. |
| 。 |
Power Backup: Centralized power management through UPS at DVR site, no worry for power blackout. |
|
Specification |
|
 |
| Item\Model |
CRX-100VAP |
CTX-101VAP |
| Signal |
Power / Video / Audio |
| Communication |
Transmitter |
Receiver |
| Video |
F Connector: RF in & AC out / 75 Ohm
Video Out (BNC):1Vp-p / 75 Ohm;
Audio Out (BNC): 1 Vp-p /100 Ohm
4 Pins Socket: AC Power input |
F Connector: RF out & AC in / 75 Ohm
Video In (BNC): 1 Vp-p / 75 Ohm;
Audio In (BNC): 1 Vp-p /100 Ohm
4 Pins Socket: AC / DC Power output |
| Video System |
NTSC/PAL |
| Transmission / Receiving Level |
105dBm( Typ.) |
60-110dBm |
| Gain Controller |
0-20dBm (Adjustable) |
- |
| Transmission Distance*1 |
RG 11: 2000 Meters (Attenuation 2 dB/100 M@ 40MHz; 2.5 Ohm/100M impedance);
RG 6: 1000 Meters (Attenuation 4 dB/100 M@ 40MHz; 10 Ohm/100M impedance);
RG 59: 500 Meters (Attenuation 8 dB/100 M@ 40MHz; 15 Ohm/100M impedance) |
| Input Power |
AC 110V or 220V |
- |
| Output Power |
- |
DC 12V/1A or DC 12V/2A (Optional) |
| Surge Protection |
DC Breakdown Voltage: 350V ± 15% (@rising voltage 100V/s)
Impulse Breakdown Voltage: ≦ 700V (@rising voltage 1KV/μs)
Insulation Resistance: ≧ 10000MΩ |
| Indicator |
Red: Power indicator / Green: Video/Audio indicator |
| Environmental |
Temperature: -10 ℃ ～ 60℃; Humidity: 0～95 ％ (Non-Condensing) |
| Dimension (L x W x H) |
70x97x35 mm |
70x97x35 mm |
| Weight |
0.3Kg |
0.25 Kg |
Note:
1. All test base on DC12V/1A power consumption.
2. Product specifications are subject to change without notice.
3. EZLink is trademark of I-View Communication Inc.
4. All other trademarks belong to their respective owners. |
|
 |
|
Accessories |
|
| PS8002-AC AC 80V Power Supply |
| 。 |
Input: AC110V or 220V; Output: AC80V/0.2A |
| 。 |
Using by Toroidal power transformer. |
| 。 |
Dimension: 95x 63 x 58 mm (L x W x H) (W/O Cable)
|
| 。 |
Weight: 0.64 Kg
|
|
 |
| PS8004-AC AC 80V Power Supply |
| 。 |
Input: AC110V or 220V; Output: AC80V/0.4A |
| 。 |
Support 2 pcs PI-1201A (DC12V/1A) or PI-1202A (DC12V/2A) power demodulator. |
| 。 |
Dimension: 95x 63 x 58 mm (L x W x H) (W/O Cable) |
| 。 |
Weight: 0.8 Kg |
|
 |
| PI-1201A DC12V/1A Switching Power Demodulator |
| 。 |
Input: AC40-90V; Output: DC12V/1A |
| 。 |
Dimension: 72 x 26 x 41 mm (L x W x H) (W/O Cable) |
| 。 |
Weight: 80g |
|
 |
| PI-1202A DC12V/2A Switching Power Demodulator |
| 。 |
Input: AC40-90V; Output: DC12V/2A |
| 。 |
Dimension: 68 x 42 x 25 mm (L x W x H) (W/O Cable) |
| 。 |
Weight: 160g |
|
 |
|
Application Configuration |
|
● Power / Video / Audio
Transmission
|
Order Information |
|
| CRX-100VAP: |
Video/ Audio/Power Receiver. |
| CTX-101VAP: |
Video/ Audio/Power Transmitter. |
| PS8002-AC/110V: |
AC110V input and AC80V/0.2A Output AC Power supply for CRX-100VAP. |
| PS8002-AC/220V: |
AC220V input and AC80V/0.2A Output AC Power supply for CRX-100VAP. |
| PS8004-AC/110V: |
AC110V input and AC80V/0.4A Output AC Power supply for CRX-100VAP. |
| PS8004-AC/220V: |
AC220V input and AC80V/0.4A Output AC Power supply for CRX-100VAP. |
| PI-1201A: |
AC40-90V input, DC12V/1A Output Power demodulator; for CTX-101VAP site power input. |
| PI-1202A: |
AC40-90V input, DC12V/2A Output Power demodulator; for CTX-101VAP site power input. |
|
