 |
Multi Power/Video Coaxial Transmission System |
 |
 |
 |
|
We develop and create complete CCTV transmission solutions of Video/Audio/Power/Data transceivers systems over ordinary Coaxial cable. i.e. Video/audio/power/ data can transmit via a single coaxial cable and the transmission distance can over 1 Km. This transmission system will let the PTZ camera installation simple, easy and saving-cost.
The Model CTX-104PVADVideo/Audio/Data Transmitter +12VDC/4A or 24VAC/2A Converter is a transmitter combined with a AC80-65V-to-12VDC or AC 24V converter. Designed to fit on the back of a fixed 12 VDC or 24VAC Speed dome camera, this unit is architect to convert AC80-65V power from the control room (DVR Site), while use with CRX-104PVAD delivering real-time video, audio, data signals and power at extended distances, all over single coaxial cable.
The Receiver CRX-104PVAD on the control room (DVR Site), which allow AC110 or 220V inputs that can support at-distance Speed dome camera loads up to DC12V/4A or AC24V/2A for RG 11cable runs under 3000ft (1000m) or RG 6 cable runs under 2000ft (600m). The PVAD transmission system builds in diagnostic LED display load/no-load at a glance and surge protection, damaging voltage spike problems are eliminated.
|
Key Features |
|
| 。 |
All in One:
Transmit the Power/Video/Audio/Data via a single coaxial
cable. |
| 。 |
High Power: Provide AC24V/2A & DC12V/4A & DC24V/2A high current power. |
| 。 |
Long Distance: Up to 1Km(RG-11) transmission distance via coaxial cable. |
| 。 |
Surge Protection: Built in power/video/data surge protector for best outdoor usage. |
| 。 |
Interference: Superior interference immunity. |
| 。 |
Indicator: LED indicator to show the status of Power, Video, Data transmission. |
| 。 |
Power Backup: Centralized power management through UPS at DVR site, no worry for power blackout. |
| 。 |
Rack Mount: Supports 19"rack mount. |
| 。 |
Secure: Secure the video signal by RF Modulation transmission. |
| 。 |
Safety: Safer power construction via AC65V/1A. |
|
Specification |
|
 |
|
Item\Model |
CRX-124PVAD |
CTX-124PVAD |
CRX-104PVAD |
CTX-104PVAD |
|
Signal |
Video/Audio/Data/Power |
|
Communication |
Receiver |
Transmitter |
Receiver |
Transmitter |
|
Video System |
NTSC/PAL |
|
Connector |
F Connector:
RF Signal& AC Power /75 Ohm;
Video in/out
(BNC):1Vp-p
/75 Ohm; Audio
in/out (BNC):
3 Vp-p /100 Ohm;
4 Pin Socket
(2.54mm):
Power input; 4
Pin Socket (3.96mm):
Power output;
Terminal Block:
RS-485; Power
jack: DC12V
Output |
|
Output/Sensitivity |
102dBm ( Typ.) |
60-110dBm |
108dBm ( Typ.) |
65 -110dBm |
|
Surge Protection |
DC Breakdown Voltage:
350V ± 15% (@rising voltage 100V/s);
Impulse Breakdown
Voltage:≦700V
(@rising voltage 1KV/μs);
Insulation Resistance:
≧ 10000MΩ |
|
Indicator |
Red:
Power; Green:
Video/Audio/Data |
Orange:
Power; Green:
Video/Audio/Data |
|
Transmission Distance |
RG 11:
2000M;
RG 6:
1000M;
RG 59: 500M |
RG 11:
1000M; RG 6:
700M; RG 59:
400M |
|
RS-485 |
Simplex; 0 ~ 19,200
BPS |
|
Gain |
0-20dBm (Adjustable) |
- |
- |
- |
|
Output Power |
AC80V |
DC12V /1A or 2A |
AC80V |
AC24V/2A(Optional) |
|
Dimension (L x W xH) |
70x97x35 mm |
200x145x44 mm |
162x100x65 mm |
|
Weight |
0.35Kg |
0.3Kg |
2Kg |
0.85Kg |
Note:
1. All test base on DC12V/1A power consumption
and
RG 11:
Attenuation 2 dB/100 M@ 40MHz;
2.5Ω/100M; RG 6: Attenuation 4
dB/100 M@ 40MHz; 10Ω/100M; RG 59:
Attenuation 8 dB/100 M@ 40MHz; 15Ω/100M.
2. Product specifications are subject to
change without notice.
3. EZLink is trademark of I-View Communication Inc
4. All other trademarks belong to their respective
owners. |
|
 |
|
Accessories |
|
|
RMP-319 19 inches Rack Mount Panel |
| 。 |
Allow 3 sets of CRX-300VP devices in 1 U high of 19"cabinet. |
| 。 |
Maintain easily with
modularized design. |
|
 |
| PS8002-AC AC 80V Power Supply |
| 。 |
Input: AC110V or 220V; Output: AC80V/0.2A |
| 。 |
Using by Toroidal power transformer. |
| 。 |
Dimension: 95x 63 x 58 mm (L x W x H) (W/O Cable)
|
| 。 |
Weight: 0.64 Kg
|
|
 |
| PS8004-AC AC 80V Power Supply |
| 。 |
Input: AC110V or 220V; Output: AC80V/0.4A |
| 。 |
Support 2 pcs PI-1201A (DC12V/1A) or PI-1202A (DC12V/2A) power demodulator. |
| 。 |
Dimension: 95x 63 x 58 mm (L x W x H) (W/O Cable) |
| 。 |
Weight: 0.8 Kg |
|
 |
| PI-1201A DC12V/1A Switching Power Demodulator |
| 。 |
Input: AC40-90V; Output: DC12V/1A |
| 。 |
Dimension: 72 x 26 x 41 mm (L x W x H) (W/O Cable) |
| 。 |
Weight: 80g |
|
 |
| PI-1202A DC12V/2A Switching Power Demodulator |
| 。 |
Input: AC40-90V; Output: DC12V/2A |
| 。 |
Dimension: 68 x 42 x 25 mm (L x W x H) (W/O Cable) |
| 。 |
Weight: 160g |
|
 |
|
Application Configuration |
|
●Power / Video / Audio
/ Data Transmission
|
Order Information |
|
| CRX-104PVAD: |
Video/Audio /Power/Data
receiver. |
| CTX-104PVAD/DC: |
Video/Audio /Power/Data
transmitter provides DC12V/4A power for Speed dome. |
| CTX-104PVAD/AC: |
Video/Audio /Power/Data
transmitter provides AC24V/2A power for Speed dome. |
| CRX-124PVAD: |
Video/ Audio/Power/Data
Receiver. |
| CTX-124PVAD:
|
Video/ Audio/Power/Data
Transmitter. |
| PS8002-AC/110V: |
AC110V input and AC80V/0.2A
Output AC Power supply for CRX-124PVAD. |
| PS8002-AC/220V:
|
AC220V input and AC80V/0.2A
Output AC Power supply for CRX-124PVAD. |
| PS8004-AC/110V: |
AC110V input and AC80V/0.4A
Output AC Power supply for CRX-124PVAD. |
| PS8004-AC/220V:
|
AC220V input and AC80V/0.4A
Output AC Power supply for CRX-124PVAD. |
| PI-1202A: |
AC40-90V input, DC12V/1A
Output Power demodulator; for CTX-124PVAD site power
input. |
| PI-1202A: |
AC40-90V input, DC12V/2A
Output Power demodulator; for CTX-124PVAD site power
input. |
| RMP-319: |
19 inches Rack Mount Panel |
|
