Digital Video Recording System-I-View Communication Inc.

HOME > PRODUCTS > @-WITNESS DVR CARD > PTZ AND l/O MODULE > NC-3213USB

DVR Board

PTZ and I/O Module

NC-3213USB PTZ Controller Card

The NetCom Card is an interface converter that can be installed inside a PC for control the PTZ Camera. The NC-3213USB IO Card adds 16 digital inputs, and 6 relay outputs.

Specifications

Interface

RS-485; Full Duplex

Baud Rate

19200/9600/4800/2400 Baud rate selectable.

PTZ

Control 16 PTZ or Speed Dome camera nodes -

Input		Input　16
		Input Signal　5V DC (Dry contact) / TTL
		High/Low State　5V/0V

Output		Relay Output　 6
		Relay Status　NO (Normal Open)
		Contact rating 10A@ 28V DC; 10A@ 125V/220V AC
		Relay ON/OFF Time　5ms

DC In

DC 12V/400mA; Power provides from PCI Bus or Power supply.

Environmental		Temperature Operation: 0-70℃, Storage: -10-80℃
Conditions		Humidity 5%~95% (non-condensing)

Compatible Models

@-Witness DVR Card: All models

Dimensions

143 (W) x 102 (H) mm

Extension Module		NC-16DI-16 Digital Input (Optional)
Extension Module		NC-07DO-7 Relay Output (Optional)

Note:
Each NC-3213USB Controller board allows connecting 2 sets NC-16DI and 1 set NC-07DO module, to achieve 32 sensors in and 13 relays out.

NetCom Configuration

TEL : 886-3-5103001 　FAX : 886-3-5103002　E-mail : info@i-view.com.tw