ParkCam® EV Charging Parking Space Detection Camera
ParkCam® Electric Vehicle (EV) charging parking space detection camera combines license plate recognition, vehicle category detection, trigger parking space lock, LED display information, snapshot function, and real-time cooperation with ParkHelper® parking space management host to provide the best solution for electric car charging parking space management.
Monitoring Parking Space
Identifies vehicles and monitors occupancy in every parking space.
No License Plate Car
Auto pop-up alarm message when there is no license plate car parking.
Across Parking Space
Auto pop-up alarm message when the car across the parking space.
2 Parking Space detection
One EV Parking camera can cover 2 parking spaces and car license plate recognition.
0% None-lost Parking Status
The cameras will continue to detect occupancy/vacancy and keep on saving the snapshot with the time stamp on the SD card, even if a network or server interruption should occur.
EV charging parking space management
Avoid nonelectric vehicle parking, limit parking time, and warn vehicles that are parked but not charging.
Allow setting VPN Network for remote access device connection, while establishing a safe and reliable network transmission environment.
Support two-way audio communication, ask the control center for assistance when the problem occurs.
Instant Voice Alert
Immediately notify the driver to leave via a voice alert, when a nonelectric vehicle parking by mistake.
Connecting LED Display
RS-485 port connects the LED display to show the parking rules and inform the violation information in real-time.
Supports DDNS allowing Internet access directly, no need for a static IP address.
When the lens is blocked, an immediate warning will notify the control center.
Control parking spot lock
Prevent non electric vehicles from parking in charging parking via control the lifting and downing of parking spot lock.
IP 66 Waterproof
IP66 (NEMA-4X) weatherproof, suitable for indoor and outdoor use.
Smart IR LED
Built-in smart scene detection has the advantages of avoiding image overexposure and energy saving.
|Model||PC-2MIPV06-F03||EV Charging Parking Space Detection Camera|
|Platform||High performance DSP; 512MB Flash; 1024MB DDR II RAM and Linux O.S. Image Sensor.|
|Image Sensor||1/2.7” 2MP Sony progressive scan CMOS sensor.|
|Illumination||Color: 0.02 Lux/F1.2; B/W: 0.008 Lux/F1.2|
|Parking Spaces||2 Charging parking spaces detection simultaneously.|
|Vehicle Recognition||Color, Category, License plate number (≥97% accuracy rate)|
|Vehicle Detection||Across the parking space detection; No license plate detection.|
|Accuracy||≥ 97% Parking space detection accuracy|
|Response Time||Detection time ≥ 200ms|
|Video Detection||Lens occlusion, Lose focus|
|Lens||2.8mm/4mm F1.2 | View angle: 86°/65.3°(2.8mm); 73.6°/54.4°(4mm)|
|Shutter||Auto / Fixed：1/25 ~1/1,000s|
|NDR||3D Noise reducer|
|Video Control||Brightness, Contrast, Saturation, Sharpness, Hue, Exposure, Mirror, Shutter, Flicker-less, OSD, 3D Noise reduction, AWB, AGC, WDR, Audio gain, Alarm in/out, IVS trigger, Network fail detection, SD card, Network filed detect, FTP, Email.
|IR Cut||Auto, Manual, Schedule IR-Cut switch mode. (Selectable)|
|Frame Rate||1~25 fps adjustable|
|Bit Rate||512K–5M Bits/sec; adjustable quality and Bitrate.|
|Resolution||Main: 1920x1080、1280x720 | Sub: 720*576，640x360|
|Audio Encoder||G.711/AAC Encoder|
|Audio In/Out||Support two-way audio; 2Vp-p audio in 30mw | audio output with 600Ω impedance.|
|LED||Built-in 6 pcs 1W high power white-light LED|
|Surge Protection||Static electricity: 6KV (Contact ) | 8KV (Air)
Surge: 10/700, 4KV (Common-mode) | 2KV (Differential mode )
|Protocol||IPv4, DNS, DDNS, DHCP, PPPoP, HTTP, RTSP, UDP, TCP, SSH, QoS, UPnP, SMTP, VPN, FTP, 4G, RS-485.|
|Communication||RJ-45 (100 BASE-TX)|
|Display Control||RS-485 control LED Display for parking information|
|I/O Port||RJ45, RS-485, Audio in/out, Alarm in/out.|
|Timer||Manual Time Setting; Time Server, NTP support, DST offset and Real Time Clock.|
|Size / Weight||115mm (W) x 252mm (L) x 93mm (H) | 1.2Kg|
|Waterproof||IP 66 Weather-proof rated housing|
|Power Consumption||Maximum 8W when LED on; DC 12V input|
|Temperature||Operation: -20°C ~ 70°C; Humidity 20% ~ 80% RH|
|Certificated||CE, FCC, RoHS, IP66|
|* Specifications are subject to change without prior notice.|